米振莉
研究員、博士生導師
科研方向
鋼材品種開發及性能優化
金屬材料深加工（成形、焊接、涂鍍）技術
汽車用鋼輕量化技術及服役性能研究
基于材料基因工程的材料設計新技術新方法
金屬材料深加工（成形、焊接、涂鍍）技術
汽車用鋼輕量化技術及服役性能研究
基于材料基因工程的材料設計新技術新方法
社會職務
中國金屬學會金屬材料深度加工分會委員兼秘書長
中國汽車工程學會理事
中國汽車工程學會理事
簡歷
1990.09 – 1994.07 北京科技大學 學士學位
1998.09 – 2001.04 北京科技大學 碩士學位
2003.09 – 2007.04 北京科技大學 博士學位
2016.11 – 2017.05 美國羅格斯大學 高級訪問學者
1994至今任職于北京科技大學，研究員，博士生導師
1998.09 – 2001.04 北京科技大學 碩士學位
2003.09 – 2007.04 北京科技大學 博士學位
2016.11 – 2017.05 美國羅格斯大學 高級訪問學者
1994至今任職于北京科技大學，研究員，博士生導師
代表性著作
1. Yang, Y, Mi, Z, Jiang, H, et al. Effects of the austenitizing temperature on the microstructure and mechanical properties in multiple-phase medium Mn steel. Materials Research Express, 2020, 6(12), 1265c9.
2. Zhou D, Xu M, Mi Z. Energy Absorption Mechanism of High-Strength Q&P and DP Steel Thin-Walled Structures[J]. Transactions of the Indian Institute of Metals, 2020, 73(7): 1999-2006.
3. Zhou D, Li M, Mi Z, et al. Investigation of Selective Oxidation and Reaction Wetting of Q&P Steel Under Different Dew Point During Continuous Galvanizing[J]. Transactions of the Indian Institute of Metals, 1-8.
4. Zhou D, Li M, Mi Z, et al. Insight into the law and mechanism of selective oxidation of Q&P steel under different annealing parameters[J]. Materials Research Express, 2020, 7(10): 106524.
5. Duan X, Jiang H, Mi Z, et al. Reduce the Planar Anisotropy of AA6016 Aluminum Sheets by Texture and Microstructure Control[J]. Crystals, 2020, 10(11): 1027.
6. Wang J, Mi Z, Jiang H, et al. Texture-governed electrochemical corrosion behaviour of AA 6082 alloy[J]. Journal of Materials Science, 2019, 54(8): 6608-6623.
7. Wang J Y, Jiang H T, Duan X G, Lin H T, Qiu P, Mi Z L. Orientation and microstructure topology governed crack propagation behavior in AA7021 aluminum alloys during uniaxial tension[J]. Materials Science and Engineering: A, 2019, 739: 254-263.
8. Duan X, Mi Z, Jiang H, et al. Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment[J]. Materials Research Express, 2019.
9. Xu M, Li H, Jiang R, Jiang H, Mi Z. Deformation behavior and microstructural evolution in ultra-high-strength dual-phase (UHS-DP1000) steel with different strain rates[J]. Journal of Iron and Steel Research International, 2019, 26(2): 173-181.
10. Yu Z C, Mi Z L, Guo J, et al. Studying inhomogeneous deformation of bainite-retained austenite steel during cold drawing[J]. Materials Research Express, 2018, 5(9): 096518.
11. Yang Y G, Mi Z L, Xu M, et al. Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel[J]. Materials Science and Engineering: A, 2018, 725: 389-397.
12. Yang Y G, Mi Z L, Xu M, Jiang H T, Xiu Q. Bending deformation and fracture characterisation in quenching and partitioning steel[J]. Materials Science and Technology, 2018: 1-9.
13. Yang Y, Mi Z, Liu S, et al. The Impact of Strain Heterogeneity and Transformation of Metastable Austenite on Springback Behavior in Quenching and Partitioning Steel[J]. Metals, 2018, 8(6): 432.
14. Yang Y G, Mi Z L, Li H, Xu Mei, Jiang R T. Effects of Shear Strain on Orientation Gradients, the Instability of Austenite Diffraction Peak, and Microstructure in Twinning-Induced Plasticity (TWIP) Steels[J]. Steel research international, 2018,89(2):1-8.
15. Xu M, Mi Z L, Li H, Tang D, Jiang H T. Deformation mechanism transition in Fe–17Mn–0.4 C–0.06 V TWIP steel with different strain rates[J]. Materials Science and Technology, 2018,34(2):242-251.
16. Li L, Mi Z L, Wang Z, et al. Modified quenching temperature selection method for partial austenitization quenching and partitioning steel[J]. Materials Research Express, 2018, 5(6): 066553.
17. Yu Z C, Mi Z L, Cai Q W, et al. Effect of Final Rapid Cooling Temperature on Ultra-Fine Carbides of Ti-Mo Ferrite Matrix Microalloyed Steel[C]//Materials Science Forum. Trans Tech Publications, 2018, 926: 3-10.
18. Li H, Xu M, Li Z, Jiang R, Jiang H, Li L, Mi Z. Hot deformation behaviour and processing map of a typical Fe-Mn-Si-Cr steel for automotive body structures[J]. Ironmaking & Steelmaking, 2018, 45(10): 937-943.
19. Li H, Xu M, Li Z T, Jiang R T, Jiang H T, Li Long, Mi Z L. Hot deformation behaviour and processing map of a typical Fe-Mn-Si-Cr steel for automotive body structures[J]. Ironmaking & Steelmaking, 2017: 1-7.
20. Xu M, Yang Y G, Chen J Y, Tang D, Jiang H T, Mi Z L. Effects of strain states on stability of retained austenite in medium Mn steels[J]. Journal of Iron and Steel Research, International, 2017, 24(11): 1125-1130.
21. Li Hui, Mi Zhenli, Zhang Xiaolei, Tang Di, Wang Yide. Carbide Dissolution during Intercritical Austenitization in Bearing Steel[J]. Journal of Wuhan University of Technology(Materials Science Edition),2014,06:1242-1245.
22. Yujie Wei；Yongqiang Li；Lianchun Zhu；Yao Liu；Xianqi Lei；Gang Wang；Yanxin Wu；Zhenli Mi；Jiabin Liu；Hongtao Wang；Huajian Gao； Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins；Nature Communications volume 5, Article number: 3580 (2014)
23. Yongqiang Li, Lianchun Zhu, Yao Liu, Yujie Wei, Yanxin Wu, Di Tang, Zhenli Mi. On the strain hardening and texture evolution in high manganese steels: Experiments and numerical investigation[J]. Journal of the Mechanics and Physics of Solids, 2013, 61(12):2588-2604.
2. Zhou D, Xu M, Mi Z. Energy Absorption Mechanism of High-Strength Q&P and DP Steel Thin-Walled Structures[J]. Transactions of the Indian Institute of Metals, 2020, 73(7): 1999-2006.
3. Zhou D, Li M, Mi Z, et al. Investigation of Selective Oxidation and Reaction Wetting of Q&P Steel Under Different Dew Point During Continuous Galvanizing[J]. Transactions of the Indian Institute of Metals, 1-8.
4. Zhou D, Li M, Mi Z, et al. Insight into the law and mechanism of selective oxidation of Q&P steel under different annealing parameters[J]. Materials Research Express, 2020, 7(10): 106524.
5. Duan X, Jiang H, Mi Z, et al. Reduce the Planar Anisotropy of AA6016 Aluminum Sheets by Texture and Microstructure Control[J]. Crystals, 2020, 10(11): 1027.
6. Wang J, Mi Z, Jiang H, et al. Texture-governed electrochemical corrosion behaviour of AA 6082 alloy[J]. Journal of Materials Science, 2019, 54(8): 6608-6623.
7. Wang J Y, Jiang H T, Duan X G, Lin H T, Qiu P, Mi Z L. Orientation and microstructure topology governed crack propagation behavior in AA7021 aluminum alloys during uniaxial tension[J]. Materials Science and Engineering: A, 2019, 739: 254-263.
8. Duan X, Mi Z, Jiang H, et al. Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment[J]. Materials Research Express, 2019.
9. Xu M, Li H, Jiang R, Jiang H, Mi Z. Deformation behavior and microstructural evolution in ultra-high-strength dual-phase (UHS-DP1000) steel with different strain rates[J]. Journal of Iron and Steel Research International, 2019, 26(2): 173-181.
10. Yu Z C, Mi Z L, Guo J, et al. Studying inhomogeneous deformation of bainite-retained austenite steel during cold drawing[J]. Materials Research Express, 2018, 5(9): 096518.
11. Yang Y G, Mi Z L, Xu M, et al. Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel[J]. Materials Science and Engineering: A, 2018, 725: 389-397.
12. Yang Y G, Mi Z L, Xu M, Jiang H T, Xiu Q. Bending deformation and fracture characterisation in quenching and partitioning steel[J]. Materials Science and Technology, 2018: 1-9.
13. Yang Y, Mi Z, Liu S, et al. The Impact of Strain Heterogeneity and Transformation of Metastable Austenite on Springback Behavior in Quenching and Partitioning Steel[J]. Metals, 2018, 8(6): 432.
14. Yang Y G, Mi Z L, Li H, Xu Mei, Jiang R T. Effects of Shear Strain on Orientation Gradients, the Instability of Austenite Diffraction Peak, and Microstructure in Twinning-Induced Plasticity (TWIP) Steels[J]. Steel research international, 2018,89(2):1-8.
15. Xu M, Mi Z L, Li H, Tang D, Jiang H T. Deformation mechanism transition in Fe–17Mn–0.4 C–0.06 V TWIP steel with different strain rates[J]. Materials Science and Technology, 2018,34(2):242-251.
16. Li L, Mi Z L, Wang Z, et al. Modified quenching temperature selection method for partial austenitization quenching and partitioning steel[J]. Materials Research Express, 2018, 5(6): 066553.
17. Yu Z C, Mi Z L, Cai Q W, et al. Effect of Final Rapid Cooling Temperature on Ultra-Fine Carbides of Ti-Mo Ferrite Matrix Microalloyed Steel[C]//Materials Science Forum. Trans Tech Publications, 2018, 926: 3-10.
18. Li H, Xu M, Li Z, Jiang R, Jiang H, Li L, Mi Z. Hot deformation behaviour and processing map of a typical Fe-Mn-Si-Cr steel for automotive body structures[J]. Ironmaking & Steelmaking, 2018, 45(10): 937-943.
19. Li H, Xu M, Li Z T, Jiang R T, Jiang H T, Li Long, Mi Z L. Hot deformation behaviour and processing map of a typical Fe-Mn-Si-Cr steel for automotive body structures[J]. Ironmaking & Steelmaking, 2017: 1-7.
20. Xu M, Yang Y G, Chen J Y, Tang D, Jiang H T, Mi Z L. Effects of strain states on stability of retained austenite in medium Mn steels[J]. Journal of Iron and Steel Research, International, 2017, 24(11): 1125-1130.
21. Li Hui, Mi Zhenli, Zhang Xiaolei, Tang Di, Wang Yide. Carbide Dissolution during Intercritical Austenitization in Bearing Steel[J]. Journal of Wuhan University of Technology(Materials Science Edition),2014,06:1242-1245.
22. Yujie Wei；Yongqiang Li；Lianchun Zhu；Yao Liu；Xianqi Lei；Gang Wang；Yanxin Wu；Zhenli Mi；Jiabin Liu；Hongtao Wang；Huajian Gao； Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins；Nature Communications volume 5, Article number: 3580 (2014)
23. Yongqiang Li, Lianchun Zhu, Yao Liu, Yujie Wei, Yanxin Wu, Di Tang, Zhenli Mi. On the strain hardening and texture evolution in high manganese steels: Experiments and numerical investigation[J]. Journal of the Mechanics and Physics of Solids, 2013, 61(12):2588-2604.
獲獎
河北省科學技術進步一等獎（2016），排名第二
邯鄲市科學技術一等獎（2016），排名第二
冶金科學技術三等獎（2011），排名第一
邯鄲市科學技術一等獎（2016），排名第二
冶金科學技術三等獎（2011），排名第一
專利
近五年的授權發明專利：
1.米振莉，汪振，蘇嵐，吳彥欣，胡水平，張勇軍；一種高強鋼非閉口件的高溫氣壓脹形裝置，ZL201910154227.4，2019-03-01
2.米振莉，羅翔，吳彥欣，李會健，張彭磊，彭飛，張迪；一種汽車用冷軋低合金高強度空冷強化鋼及制備方法[P]. 北京：CN109972058B,2019-03-28
3.米振莉，汪振，吳彥欣，胡水平，郭錦，楊永剛，張勇軍；一種高強鋼非閉口件的組織性能一體化調控性能及工藝，CN209821957B,2019-03-28
4.米振莉，羅翔，吳彥欣，江海濤；一種熱氣脹成型用空冷強化鋼及其制備方法[P]. 北京：CN109881093B,2019-03-01.
5.米振莉，徐梅，李龍，楊永剛，江海濤，蔣睿婷，汪振；一種低成本高強塑型高錳TWIP/TRIP效應共生鋼及其制備方法[P]. 北京：CN107574376A,2018-01-12.
6.米振莉，徐梅，李龍，楊永剛，江海濤，蔣睿婷，汪振；一種基于納米結構的高吸能型高錳TWIP鋼及其制備方法[P]. 北京：CN107574377A,2018-01-12.
7.米振莉，張小壘，李輝，李志超；一種GCr15高碳鉻軸承鋼在線快速球化退火工藝[P]. 北京：CN104328259A,2015-02-04.
1.米振莉，汪振，蘇嵐，吳彥欣，胡水平，張勇軍；一種高強鋼非閉口件的高溫氣壓脹形裝置，ZL201910154227.4，2019-03-01
2.米振莉，羅翔，吳彥欣，李會健，張彭磊，彭飛，張迪；一種汽車用冷軋低合金高強度空冷強化鋼及制備方法[P]. 北京：CN109972058B,2019-03-28
3.米振莉，汪振，吳彥欣，胡水平，郭錦，楊永剛，張勇軍；一種高強鋼非閉口件的組織性能一體化調控性能及工藝，CN209821957B,2019-03-28
4.米振莉，羅翔，吳彥欣，江海濤；一種熱氣脹成型用空冷強化鋼及其制備方法[P]. 北京：CN109881093B,2019-03-01.
5.米振莉，徐梅，李龍，楊永剛，江海濤，蔣睿婷，汪振；一種低成本高強塑型高錳TWIP/TRIP效應共生鋼及其制備方法[P]. 北京：CN107574376A,2018-01-12.
6.米振莉，徐梅，李龍，楊永剛，江海濤，蔣睿婷，汪振；一種基于納米結構的高吸能型高錳TWIP鋼及其制備方法[P]. 北京：CN107574377A,2018-01-12.
7.米振莉，張小壘，李輝，李志超；一種GCr15高碳鉻軸承鋼在線快速球化退火工藝[P]. 北京：CN104328259A,2015-02-04.
科研項目
近五年主持并參與的主要科研項目
縱向項目
1.國家重點研發計劃：“高性能超高強汽車用鋼的新型先進成型技術開發與應用示范”2017-2021
2.中央高校基本業務費：“高品質交通及能源用特殊鋼的研究與開發”2017-2018
3.國家工信部智能制造示范類：“高端線材全流程智能制造新模式應用”2017-2020
4.山東省重點研發計劃“超高強韌汽車用鋼的關鍵制造技術及產業化應用”2019-2022
5.北京市教委共建項目：“綠色高性能汽車鋼研制與應用研究”2020-2023
橫向項目
1.河北鋼鐵股份有限公司邯鄲分公司：“新一代汽車用鋼生產工藝技術開發”，2015
2.安陽鋼鐵股份有限公司：“高品質冷軋家電與汽車用鋼板研究與開發”，2016
3.中鋁瑞閩股份有限公司：“基于材料基因工程研發汽車板用6XXX系鋁合金”，2018
4.江蘇沙鋼集團有限公司：“高端線材全流程工藝過程數字化仿真系統”，2018
5.婁底華菱薄板產業園開發建設有限公司：“婁底華菱薄板產業園發展規劃”，2019
6.河鋼股份有限公司邯鄲分公司：“超高強汽車板成形失效特性相關研究”，2019
7.寶鋼集團南通線材制品有限公司：“鋅鋁鎂鍍層鋼絲開發與技術研究”，2019
8.寶山鋼鐵股份有限公司“BSCCR流程QP、CP、MS鋼組織演變規律及對性能的影響機理研究”，2020
9.寶山鋼鐵股份有限公司“BSCCR鐵素體軋制專業化產線數值模擬平臺開發與組織性能調控機理研究”，2020
縱向項目
1.國家重點研發計劃：“高性能超高強汽車用鋼的新型先進成型技術開發與應用示范”2017-2021
2.中央高校基本業務費：“高品質交通及能源用特殊鋼的研究與開發”2017-2018
3.國家工信部智能制造示范類：“高端線材全流程智能制造新模式應用”2017-2020
4.山東省重點研發計劃“超高強韌汽車用鋼的關鍵制造技術及產業化應用”2019-2022
5.北京市教委共建項目：“綠色高性能汽車鋼研制與應用研究”2020-2023
橫向項目
1.河北鋼鐵股份有限公司邯鄲分公司：“新一代汽車用鋼生產工藝技術開發”，2015
2.安陽鋼鐵股份有限公司：“高品質冷軋家電與汽車用鋼板研究與開發”，2016
3.中鋁瑞閩股份有限公司：“基于材料基因工程研發汽車板用6XXX系鋁合金”，2018
4.江蘇沙鋼集團有限公司：“高端線材全流程工藝過程數字化仿真系統”，2018
5.婁底華菱薄板產業園開發建設有限公司：“婁底華菱薄板產業園發展規劃”，2019
6.河鋼股份有限公司邯鄲分公司：“超高強汽車板成形失效特性相關研究”，2019
7.寶鋼集團南通線材制品有限公司：“鋅鋁鎂鍍層鋼絲開發與技術研究”，2019
8.寶山鋼鐵股份有限公司“BSCCR流程QP、CP、MS鋼組織演變規律及對性能的影響機理研究”，2020
9.寶山鋼鐵股份有限公司“BSCCR鐵素體軋制專業化產線數值模擬平臺開發與組織性能調控機理研究”，2020